Here are instructions for Railz Recreational Scooters:
Step 1 – Lift the bail on the lynch pin and swing it away from the pin.
Step 2 – Pull lynch pin out.
Step 3 – Swing handle bar up to the open position.
Step 4 – Insert the lynch pin into the open position hole (upper hole).
Step 5 – Push lynch pin through the brackets (pin will fit tight and will need to be aligned and manipulated to get pin pushed through the brackets).
Step 6 – Snap lynch pin bail down over the exposed end of the pin.
Step 7 – Locate the safety bolt (attached to scooter in a zip bag).
Step 8 – Push the bolt through the bracket as shown.
Step 9 – Install the threaded bolt from the other side.
Step 10 – Tighten the safety bolt using the 5mm hex wrenches provided.
If you have any questions, please e-mail us at: firstname.lastname@example.org