Posted on

How To Convert From Snow Scooter To Wheel Scooter

Here are instructions for converting your Railz Conversion Scooter from a Snow Scooter to a Wheel Scooter. These instructions only apply to the Youth and Full Size Street and Snow Scooters.

Step 1 – Remove rear axle bolt using two 5mm hex keys.

Step 1

Step 2 – Axle bolt removed from rear ski.

Step 2

Step 3 – Remove front axle bolt using two 5mm hex keys.

Step 3

Step 4 – Remove brake axle bolt using 8mm wrench and 4mm hex key.

Step 4

Step 5 – Brake axle bolt and spring removed from Scooter & Brake.

Step 5

Step 6 – Insert wheel axle bolt through the rear axle mount and wheel (align axle bolt through wheel bearings and internal bearing spacer).

Step 6

Step 7 – Insert axle bolt from opposite side of axle and use two 5mm hex keys to tighten (ensure that wheel still spins freely).

Step 7

Step 8 – Locate wheel brake, axle, nut and spring.

Step 8

Step 9 – Start axle bolt through wheel brake and spring.

Step 9

Step 10 – Use 4mm hex key with twisting motion to compress spring and allow axle to be pushed through opposite side holes.

Step 10

Step 11 – Install the 8mm nut on the brake axle bolt and tighten using a 4mm hex key and 8mm wrench.

Step 11

Step 12 – Completed conversion to wheeled scooter, reverse process to convert back to snow scooter.

Step 12

If you have any questions, please e-mail us at:

Leave a Reply

Your email address will not be published. Required fields are marked *