Posted on

Attach Handle Bar To Pro Scooter

Here are instructions on how to attach the handle bar to the Pro Scooter, Model BD 5.0.

Step 1 – Locate the handle bar and the scooter base.

Handle Bar Step 1

Step 2 – Line up the handle bar and the scooter base. Ensure that the handle bar clamp bolts are towards the rear of the scooter and ensure that the taper of the front fork is towards the rear of the scooter.

Handle Bar Step 2

Step 3 – Push the handle bar onto the scooter base head tube (ensure that the handle bar is perpendicular to the front ski) and then tighten the three clamp bolts using the 5mm hex key.

Handle Bar Step 3

Step 4 – Assembled snow scooter

unnamed

Any questions, e-mail us at: support@railzusa.com.

Posted on

How To Convert From Snow Scooter To Wheel Scooter

Here are instructions for converting your Railz Conversion Scooter from a Snow Scooter to a Wheel Scooter. These instructions only apply to the Youth and Full Size Street and Snow Scooters.

Step 1 – Remove rear axle bolt using two 5mm hex keys.

Step 1

Step 2 – Axle bolt removed from rear ski.

Step 2

Step 3 – Remove front axle bolt using two 5mm hex keys.

Step 3

Step 4 – Remove brake axle bolt using 8mm wrench and 4mm hex key.

Step 4

Step 5 – Brake axle bolt and spring removed from Scooter & Brake.

Step 5

Step 6 – Insert wheel axle bolt through the rear axle mount and wheel (align axle bolt through wheel bearings and internal bearing spacer).

Step 6

Step 7 – Insert axle bolt from opposite side of axle and use two 5mm hex keys to tighten (ensure that wheel still spins freely).

Step 7

Step 8 – Locate wheel brake, axle, nut and spring.

Step 8

Step 9 – Start axle bolt through wheel brake and spring.

Step 9

Step 10 – Use 4mm hex key with twisting motion to compress spring and allow axle to be pushed through opposite side holes.

Step 10

Step 11 – Install the 8mm nut on the brake axle bolt and tighten using a 4mm hex key and 8mm wrench.

Step 11

Step 12 – Completed conversion to wheeled scooter, reverse process to convert back to snow scooter.

Step 12

If you have any questions, please e-mail us at: support@railzusa.com

Posted on

How To Open A Railz Scooter

Here are instructions for Railz Recreational Scooters:

Step 1 – Lift the bail on the lynch pin and swing it away from the pin.

Step 1

Step 2 – Pull lynch pin out.

Step 2

Step 3 – Swing handle bar up to the open position.

Step 3

Step 4 – Insert the lynch pin into the open position hole (upper hole).

Step 4

Step 5 – Push lynch pin through the brackets (pin will fit tight and will need to be aligned and manipulated to get pin pushed through the brackets).

Step 5

Step 6 – Snap lynch pin bail down over the exposed end of the pin.

Step 6

Step 7 – Locate the safety bolt (attached to scooter in a zip bag).

Step 7

Step 8 – Push the bolt through the bracket as shown.

Step 8

Step 9 – Install the threaded bolt from the other side.

Step 9

Step 10 – Tighten the safety bolt using the 5mm hex wrenches provided.

Step 10

If you have any questions, please e-mail us at: support@railzusa.com